Frontierinstruments.com
     
    Search on site:  
 
 
Brands
Products
Crate BH112
Crate BH112
Crate BH112 Crate BH112 Description: The BH112 1x12 cabinet built around a 12 in. Blackheart by Eminence speaker in a 15-ply (18mm), classically joined, void free plywood cabinet, the BH112 makes a perfect pairing for the Blackheart Little Giant BH5H head or as an extension cab to the Little Giant 5 combo, or use it to maximize the tone of any amp in your arsenal. From it's incredibly well crafted construction to its clean tolex work, the Blackheart BH112 is a great value in the portable, powerful boutique quality extension cabinet. The closed back tuned design and (red framed) Blackheart speaker model 1216B by Eminence speaker is the fruit of extensive research involving Crate and Eminence and the result is a very tight and responsive cabinet. All of the BH-112's cabinet joinery is based on classic, proven design for tone and roadworthiness. Set the head on top of the Blackheart BH112 cabinet. Built around a 12 Blackheart by Eminence Speaker, it's made of 15 ply (18mm), classically joined, void free plywood and is the perfect mate for the BH5H head. From its incredibly well crafted construction to its clean tolex work, the BH112 is a portable, powerful and boutique quality cabinet. The closed back tuned design and (red framed) Blackheart model 1216B Speaker by Eminence is the fruit of extensive research involving Crate and Eminence. The result is a very tight and responsive cabinet. In fact, all of the BH112's cabinet joinery is based on classic, proven design for tone and roadworthiness. Crate BH112 Features: Built around a 12 Blackheart by Eminence Speaker in a 15 ply (18mm), classically joined, void free plywood cabinet, the BH112 makes a perfect pairing for the Blackheart Little Giant 5 head (BH5H) or as an extension cab to the Little Giant 5 combo (BH5-112), or use it to maximize the tone of any amp in your arsenal. From its incredibly well crafted construction to its clean tolex work, the Blackheart BH112 is a great value in a portable, powerful and boutique quality extension cabinet. The closed back tuned design and (red framed) Blackheart model 1216B Speaker by Eminence is the fruit of extensive research involving Crate and Eminence. The result is a very tight and responsive cabinet.In fact, all of the BH112's cabinet joinery is based on classic, proven design for tone and roadworthiness. Crate BH112 Specifications: 16 Ohm Handling 75W RMS 15 ply (18mm) thick, void-free Plywood Construction 12 Blackheart Model 1216B by Eminence Speaker has a British Voicing and is optimized for closed back cabinet 2 Parallel Speaker Jacks Get your Crate BH112 today!.
  SKU CRABH112
$129.99
Crate BH5-112
Crate BH5-112
Crate BH5-112 Crate BH5-112 Description: The BH5-112 is the Little Giant with huge tone. It is Blackheart made 5W, Single-Ended, Class A combo amp powered by an EL84 and voice through a 12AX7 pre-amp tube. This combo delivers truly classic boutique amplifier design in a robust, stylish package. With a switchable Pentode/Triode selector and 3-Band EQ controls you get the only amp in its class to deliver true tonal range from instantaneous punch to deliciously greasy overdrive and with precise control over output volume. Every feature of the Blackheart Little Giant BH5-112 represents zealous dedication to true quality in tone, looks and ruggedness. The open back tuned design and (blue frame) Blackheart model 1216A by Eminence speaker is the fruit of extensive research involving Crate and Eminence and the result is a very musical and responsive cabinet. Under its sexy exterior you'll find a 16 gauge, folded and welded steel chassis, 1/2 inch corner radiuses, 15 ply, void-free birch cabinetry and meticulous tolex work insuring years of reliable performance. Crate BH5-112 Features: 5 watts single-ended, Class A 4, 8 and 16 ohm speaker outs Solid state rectifier Volume with 3-Band EQ Pentode (5 Watts)/Triode (3 Watts) Switch 12 in. Blackheart model 1216A by Eminence speaker has an American voicing and is optimized for open back cabinets DC power to filaments for super quiet operation 15-ply (18 mm) thick-void free plywood cabinet construction 1 Watt resistors in signal path, 2 Watts and 5 Watts resistors in power supply Get your Crate BH5-112 today!.
  SKU CRABH5112
$249.99
Crate BH5H
Crate BH5H
Crate BH5H Crate BH5H Description: This dimunitive half stack delivers the goods like nothing else. Made up of the BH5H 5-watt head and this is a half stack worth more than double its size. Starting off with the head, the Blackheart Little Giant BH5H is a 5W, Single-Ended, Class A amp powered by an EL84 and voiced through a 12AX7 preamp tube. It's a truly classic boutique amplifier design delivered in a robust, stylish package. With a switchable pentode/triode selector and 3-band EQ controls you get the only amp in its class to deliver true tonal range, from instantaneous punch to deliciously greasy overdrive, and with precise control over output volume. Every feature of the Blackheart BH5H represents zealous dedication to true quality in tone, looks and ruggedness. Under its sexy exterior you'll find a 16 gauge steel chassis, with 1/2 corner radiuses and meticulous tolex work insuring years of reliable performance. Crate BH5H Features: 5W, Single-Ended, Class A amp powered by an EL84 and voiced through a 12AX7 preamp tube. The Blackheart Little Giant BH5H is a truly classic boutique amplifier design delivered in a robust, stylish package. With a switchable pentode/triode selector and 3-band EQ controls you get the only amp in its class to deliver true tonal range, from instantaneous punch to deliciously greasy overdrive, and with precise control over output volume. Every feature of the Blackheart BH5H represents zealous dedication to true quality in tone, looks and ruggedness. Under its sexy exterior you'll find a 16 gauge steel chassis, with 1/2 corner radiuses and meticulous tolex work insuring years of reliable performance. Crate BH5H Specifications: 5W Single-Ended, Class A 4, 8 and 16 ohm Speaker Outs Solid State Rectifier Volume with 3 Band EQ Pentode (5W)/Triode (3W) Switch DC Power to filaments for super quiet operation 15 ply (18mm) thick-void free Plywood Construction 1W resistors in signal path, 2W & 5W resistors in power supply Get your Crate BH5H today!.
  SKU CRABH5H
$159.99
Crate BH5HS
Crate BH5HS
Crate BH5HS Crate BH5HS Description: Class A all tube Little Giant amp head (BH5H) powered by an EL84 and voiced through a 12AX7 pre-amp tube. 5 watts, 4, 8 and 16 ohm speaker outs, solid state rectifier, volume with 3-band EQ, pentode (5 watt) / triode (3 watt) switch. Cabinet is the BH-112, 12 Eminence speaker, tuned closed-back design, 16 ohms, 75 watt RMS handling, 2 parallel speaker jacks. This mini half stack is a truly classic boutique amplifier design delivered in a robust, stylish package! Get your Crate BH5HS today!.
  SKU CRABH5HS
$299.99
Crate BT100
Crate BT100
Crate BT100 Crate BT100 Description: With 100W, a 15 bass driver, and a balanced line out, this compact combo can hold its own in nearly any gig situation. It has 2 channels: a distortion channel with gain, shape, and level controls; and a clean channel with level, 4-band EQ, and an octave switch with level for boosting bottom end. Its XLR balanced line out is pre/post selectable. The CFS2 2-button footswitch is included for switching channels and kicking in the octave switch from the floor. Limiter, chromatic tuner, headphone jack, and CD inputs are also incorporated. The Front Panel: 1. INPUT: Use this 1/4 jack to connect your bass to the amplifier by means of a shielded instrument cable. 2. -15dB/0dB: Use this switch to match the output signal level of your instrument to the amplifier. If your instrument has standard pickups, setting the switch to the 0dB position (switch in the out position) should yield the best results. If your bass has active electronics or high output pickups, set the switch to the -15dB position (switch depressed). 3. MUTE: This switch, when depressed, interrupts the signal prior to the power amplifier, allowing you to tune your instrument in silence. 4. GAIN: Use this control to adjust the amount of distortion for the Distortion channel. As you rotate the control clockwise the amount of distortion increases. NOTE: The BT100 employs an internal noise gate on the Distortion channel to keep residual noise to a minimum. The Clean channel's Level control (#8) must be turned up above 0 in order for the noise gate to trigger properly. The Gain control (#4) and input signal level also affect the noise gate. 5. SHAPE: Use this control to adjust the tone of the Distortion channel, from a studio V-shaped tone to a more live, more present sound. 6. LEVEL: Use this control to adjust the output level of the Distortion channel. 7. CHANNEL SWITCH: Use this switch to select either channel. With the switch in the out position, the Clean channel is selected. When the switch is depressed, the Distortion channel is selected. The adjacent LED illuminates when the Distortion channel is selected. NOTE: When using a footswitch: when this switch is depressed, the footswitch switches between the Distortion channel and the Clean channel; when this button is in the out position, the Clean channel is always active, and the footswitch turns the Distortion channel on and off, allowing you a blend of both channels. 8. LEVEL: Use this control to adjust the output level of the Clean channel, and as part of the Octave level control (see #13). 9. LOW: Use this control to adjust the low frequency output of the Clean channel. 10. LOW MID: Use this control to adjust the lower-midrange frequency output of the Clean channel. 11. HIGH MID: Use this control to adjust the upper-midrange frequency output of the Clean channel. 12. HIGH: Use this control to adjust the high frequency output of the Clean channel. 13. OCTAVE: The BT100 features internal circuit.
  SKU CRABT100
$249.99
Crate BV120HB
Crate BV120HB
Crate BV120HB Crate BV120HB Description: With new black and silver cosmetics matching the BV150 and BV300, the BV120HB is Stacked with 120 Groove Tube Watts. Generating enough power to run a full stack of eight 12 speakers to their breaking point and still have room for pie, the BV120H has been designed to perform on a professional level. Each BV 120 Head uses four 6L6/5881 and four 12AX7 tubes for solid tube tone and classic breakup. Player Type: A favorite amp of professional musicians, the BV120 is respected for its ability to deliver outstanding tone, while standing up on the road. Dial in your settings, then stand back! The supernova power of the Blue Voodoo series makes these award-winning tube amps some serious ordnance. Its sparkling clean tones, throaty rhythm contours and gain-fueled drive dramatically expand the potential of the sought-after tube sound. Blue Voodoo's explosive aftershock even reaches industry experts: Music and Sound Retailer Magazine awarded the Crate Blue Voodoo Most Innovative Amplifier of the Year in January of 1996-the same year, in no small coincidence, we championed Amp Line of the Year. With new black and silver cosmetics matching the BV150 and BV300, the BV120HB is Stacked with 120 Groove Tube Watts. Generating enough power to run a full stack of eight 12 speakers to their breaking point and still have room for pie, the BV120H has been designed to perform on a professional level. Each BV 120 Head uses four 6L6/5881 and four 12AX7 tubes for solid tube tone and classic breakup. Player Type: A favorite amp of professional musicians, the BV120 is respected for its ability to deliver outstanding tone, while standing up on the road. Dial in your settings, then stand back! Crate BV120HB Features: Power This switch turns the amplifier on in the right position and off in the left position. Standby This switch activates the amplifier, and should always be turned on last. The switch lights up when the high voltage power is passing through to the tubes. Presence Increase the level of upper harmonics with this control. The presence control allows a boost of up to 5dB at 10kHz. Effects Loop Pad This switch activates a 12dB pad on the effects send signal and corresponding gain recovery on the return. In the out position the signal is full strength which is best suited for line level rack mountable effects. With the switch in the signal is lower which is best suited for foot pedal type effects. Effects Loop Switch This switch controls the effects return signal of the effects loop. The loop is only active when the switch is pressed in. When a footswitch is used, this switch is disabled. The adjacent yellow LED glows when the loop is in use. Reverb: Level 2 Adjust the amount of reverberation on each channel with these controls: at the 0 position the signal is dry (no reverb). As you bring the control up, the amount of reverb increases. Reverb: Level 1 Adjust the amount of reverberation on each channel with these c.
  SKU CRABV120HB
$749.99
Crate CA10
Crate CA10
Crate CA10 Crate CA10 Description: The CA10 compact amplifier delivers 10 watts of pure acoustic tone via its 1/4 input with its own gain control. Three bands of EQ, centered at critical frequencies, provide exceptional tone control and minimize feedback. The Crate 8 woofer/piezo tweeter combination delivers smooth, pristine sound with outstanding projection and fidelity. Chorus with Rate control allows you to sweeten your sound, which you can listen to by yourself via the Headphones jack. A Power LED lets you know the CA10 is on-not that you'll need that when you hear the crystal clear tone coming from it. Crate CA10 Features: Crate 8 high fidelity speaker 10 watts RMS 3-band EQ Switchable Chorus with rate control and on/off switch Headphone jack The Front Panel: 1: INPUT. This is the input jack for the guitar. Plug your guitar cord into this jack. 2: LEVEL. This controls the output level of the amplifier. 3: LOW EQ. This serves as the bass control. Adjust this control to get the best sounding bass response for your instrument. 4: MID EQ. This serves as the midrange control. Adjust this control to get the best projection and midrange tones for your instrument. 5: HIGH EQ. This serves as the treble control. Adjust this control so your high notes and harmonic overtones are lively but not overpowering. 6. CHORUS ON/OFF Switch. This turns the chorus effect on and off. 7. CHORUS RATE. This controls the ripple speed of the chorus effect. Turn this control to the right to increase the speed. 8. Headphones. This is the output jack for the headphones. When headphones are connected, no sound is produced from the speaker. 9. POWER Switch. This turns the power amplifier on and off. The LED lights when the power amplifier is turned on. Crate CA10 Specifications: Output Power 10 watts rms @ 1.0% THD , 8 ohm load Speaker 1 x 6.5 inch, 8 ohms Low 12 dB @ 80 Hz Mid 12 dB @ 800 Hz High 12 dB @ 8 kHz Input Impedance 2.2M ohm Input Sensitivity 26 mV Max Input Signal 140 mV Total System Gain 18 dB @ 1kHz Dimensions 12.6 in/320 mm (H) 13.6 in/345 mm (W) 10.1 in/256 mm (D) Weight 15 lb/6.8 kg AC Power 120 VAC/60 Hz Power Consumption 19 watts Specifications and information in this manual are subject to change without notice. This apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the apparatus. Get your Crate CA10 today!.
  SKU CRACA10
$99.99
Crate CA120DG
Crate CA120DG
Crate CA120DG Crate CA120DG Description: New for 2004, we are introducing an entirely new range of acoustic amplifiers. The technology in the New Crate Acoustic Series is unique, with preamp circuits you can tailor for piezo or active systems or BOTH!!. Our NEW feedback elimination circuits are efficient and simple to use and on the 60 and 120 watt units include the ability to automatically eliminate feedback at two different frequencies. Every CA amp has a high frequency component for crisp, clear highs. On the CA120DG model we include special features for live performance like XLR & 1/4 balanced line out with Level control which does not affect your stage volume. They also have ground lift on the Line Out, Tweeter Level control, Effects Loop and a two button footswitch for Internal Reverb/Effects and Chorus switching. Also included are a wide array of Reverbs, Delays, Chorus and Multiple Effects settings. Crate CA120DG The Front Panel: 1: Low-Z. The signal from a low impedance microphone may be connected here by means of a shielded, balanced microphone cable terminated with an XLR connector. This jack has 15 volts phantom power applied to pins 2 and 3. (Mics not requiring phantom power will not be affected.) 2: Gain 1. This serves as the input level control for the XLR Input jack (#1). For the best signal to noise ratio set this control so the Peak LED (#5) flashes on strong signals. 3: High-Z. The signal from your acoustic instrument may be connected here by means of a shielded signal cable. This input will accommodate a piezo pickup or an active system. 4: Gain 2. This serves as the input level control for the High-Z jack (#3). For the best signal to noise ratio set this control so the Peak LED (#5) flashes on strong signals. 5: Peak. This LED flashes when the signal level into the preamp approaches clipping. Adjust the Gain controls (#2, #4) until a strong signal causes this LED to flash. 6: Low. This serves as the bass control. Adjust this control to get the best sounding bass response for this channel. Excessive boost of the low control can cause an unnatural howling and should be avoided. 7: Mid. This serves as the midrange control. Adjust this control to get the best projection and midrange tones for your instrument. The center point of the mid control is chosen by the setting of the Contour control (#8). 8: Contour. Use this control to set the center point of the Mid control (#7). Set this control at the frequency which gives you the most natural- sounding midrange tones. 9: High. This serves as the treble control. Adjust this control so your high notes and harmonic overtones are lively but not overpowering. 10: DSP/Eff Send. Use this control to adjust the amount of internal Digital Effect and/or external effect (if used). The Master Section - part one: 11: CD Input. Use these RCA jacks to connect a CD or tape player to the amplifier. Use the CD Level control (#12) to adjust the level of the player. 12: CD Level. Use this control to a.
  SKU CRACA120DG
$499.99
Crate CA125DG
Crate CA125DG
Crate CA125DG Crate CA125DG Description: New for 2004, we are introducing an entirely new range of acoustic amplifiers. The technology in the New Crate Acoustic Series is unique, with preamp circuits you can tailor for piezo or active systems or BOTH!!. Our NEW feedback elimination circuits are efficient and simple to use and on the 60 and 120 watt units include the ability to automatically eliminate feedback at two different frequencies. Every CA amp has a high frequency component for crisp, clear highs. On the CA6110DG, CA125DG and CA120DG models we include special features for live performance like XLR & 1/4 balanced line out with Level control which does not affect your stage volume. They also have ground lift on the Line Out, Tweeter Level control, Effects Loop and a two button footswitch for Internal Reverb/Effects and Chorus switching. Crate CA125DG The Front Panel: The Instrument Channel: 1: Input. The signal output from your acoustic instrument may be connected here by means of a shielded instrument cable. 2: Active/Piezo. Use this switch to match the type of pickup used in your instrument. For active electronic pickups, set the switch to active (switch out). For passive/magnetic pickups, set it to piezo (switch depressed). 3: Gain. This serves as the input level control for the instrument channel. For the best signal to noise ratio set this control so the Peak LED (#4) flashes on strong signals. 4: Peak. This LED flashes when the signal level into the preamp approaches clipping. Adjust the Gain control (#3) until a strong signal causes this LED to flash. 5: Low. This serves as the instrument channel's primary bass control. Adjust this control to get the best sounding bass response for your instrument. Excessive boost of the low control can cause an unnatural howling and should be avoided. 6: Mid. This serves as the instrument channel's primary midrange control. Adjust this control to get the best projection and midrange tones for your instrument. The center point of the mid control is chosen by the setting of the Contour control (#7). 7: Contour. Use this control to set the center point of the Mid control (#6). Set this control at the frequency which gives you the most natural-sounding midrange tones. 8: High. This serves as the instrument channel's primary treble control. Adjust this control so your high notes and harmonic overtones are lively but not overpowering. 9: Freq. Use this control along with the Cut control (#10) to eliminate instrument feedback. For information on the proper use of this control, please read the section entitled To Eliminate Feedback. 10: Cut. Use this control along with the Freq control (#9) to eliminate instrument feedback. For information on the proper use of this control, please read the section entitled To Eliminate Feedback. 11: Rev/Eff Send. Use this control to adjust the amount of internal Digital Effect and/or external effect (if used) for Channel 1. 12: On/Off. This switch, when depressed.
  SKU CRACA125DG
$599.99
Crate CA15
Crate CA15
Crate CA15 Crate CA15 Description: New for 2004, the CA15 Cimarron compact amplifier delivers over 12 watts of musical power and incorporates two inputs (each with its own gain control), three bands of equalization, and reverb. A pair of RCA type CD Input jacks allows you to practice with your favorite music. A jack for headphones is provided, along with a jack for connecting the CA15 to an external speaker cabinet. A Crate Custom Design 8 woofer delivers smooth clear sound with excellent projection and fidelity. The CA15 features a flip-out locking bar underneath the cabinet which allows you to tilt the amplifier back for increased coverage and projection. Crate CA15 The Front Panel: 1,3: Input 1, Input 2. The signal output from your acoustic instrument, tape player, rhythm machine, high-Z microphone or other source may be connected to either or both of these jacks by means of a shielded signal cable. Each of the input jacks is governed by its corresponding gain control (#2 for Input 1, #4 for Input 2). The signals from these two jacks are summed together after their gain stages. 2,4: Gain 1, Gain 2. Use these controls to set the input gain level for the corresponding input jack. These controls set the level of the input signal and serve as the amplifier's volume controls. 5: Low. This serves as the bass control for both channels. Adjust this control to get the best sounding bass response for your instrument. Excessive boost of the low control can cause an unnatural howling (acoustic feedback from your instrument) and should be avoided. 6: Mid. This serves as the midrange control for both channels. Adjust this control to get the best projection and midrange tones for your instrument. 7: High. This serves as the treble control for both channels. Adjust this control so your high notes and harmonic overtones are lively but not overpowering. 8: Reverb Level: Use this control to adjust the amount of reverberation added to the signal. In the fully counter clockwise position, the signal is dry (no reverb added). As you rotate the control clockwise the amount of reverb increases. 9: CD Input. Use these jacks to connect the output from a CD player, tape deck, or rhythm machine to the amplifier. The CD Input jacks are post EQ and Gain, so use the level control on the CD player (etc.) to adjust the level of the signal at these jacks. 10: Headphones. Use this jack to connect headphones to the amplfier. The internal speaker is disconnected when this jack is used. 11: External Speaker. Use this jack to connect the amplifier to an external speaker. The internal speaker is disconnected when this jack is used. The impedance of the external speaker must be 4 ohms or greater. Do not attempt to use headphones in the External Speaker jack! Permanent hearing damage could result. 12: Power Switch. (Rear panel, not shown) Use this switch to apply power to the amplifier: the amp is on when the top of the switch is depressed, off when the bottom of the switch is depr.
  SKU CRACA15
$149.99
Crate CA30DG
Crate CA30DG
Crate CA30DG Crate CA30DG Description: New for 2004, we are introducing an entirely new range of acoustic amplifiers. The technology in the New Crate Acoustic Series is unique, with preamp circuits you can tailor for piezo or active systems or BOTH!!. We use special studio monitor style speakers with polypropylene cones and rubber surrounds in ported cabinets for tight, even bass response. Every CA amp has a high frequency component for crisp, clear highs. All CA models include a wide array of Reverbs, Delays, Chorus and Multiple Effects settings. From the 30 watt CA30DG to the 125 watt CA125DG, we have an amp to fit every style, venue and budget. The Front Panel: 1: Power.Use this switch to apply power to the amplifier: the amp is on when the top of the switch is depressed, off when the bottom of the switch is depressed. The switch illuminates when the amp is on. 2: Line Out. Use this jack to connect a high impedance, unbalanced line level signal to a house sound board, a recording console or another amplifier. 3: Insert. Use this jack to add external effects to the signal. The ring = send (line out), tip = return (line in), sleeve = ground. This jack can also be used to chain multiple amplifiers together, since connecting to this jack does not interrupt the signal going to the amplifier. (See the illustrations on page 5 for more information.) 4: Effects Level. Use this control to adjust the amount of digital signal processing applied to the output signal. 5: Effects Mode. Use this control to select the type of digital signal processing applied to the output signal. (See the section entitled The DSP Section on page 6 for more information.) 6: High. This serves as the treble control for both channels. Adjust this control so your high notes and harmonic overtones are lively but not overpowering. 7: Contour. Use this control to set the center point of the mid control. This control should be set at the frequency which gives you the most natural midrange tones. 8: Mid. This serves as the midrange control for both channels. Adjust this control to get the best projection and midrange tones for your instrument. The center point of the mid control is chosen by the setting of the contour control (#7). 9: Low. This serves as the bass control for both channels. Adjust this control to get the best sounding bass response for your instrument. Excessive boost of the low control can cause an unnatural howling (acoustic feedback from your instrument) and should be avoided. 11,13:Input 2, Input 1. The signal output from your acoustic instrument, tape player, rhythm machine, high-Z microphone or other source may be connected to either or both of these jacks by means of a shielded signal cable. Each of the input jacks is governed by its corresponding gain control (#10 for Input 2, #12 for Input 1). The signals from these two jacks are summed together after their gain stages. 10,12:Gain 2, Gain 1. Use these controls to set the input gain level for the correspond.
  SKU CRACA30DG
$229.99
Crate CA6110DG
Crate CA6110DG
Crate CA6110DG Crate CA6110DG Description: New for 2004, we are introducing an entirely new range of acoustic amplifiers. The technology in the New Crate Acoustic Series is unique, with preamp circuits you can tailor for piezo or active systems or BOTH!!. Our NEW feedback elimination circuits are efficient and simple to use and on the 60 and 120 watt units include the ability to automatically eliminate feedback at two different frequencies. We use special studio monitor style speakers with polypropylene cones and rubber surrounds in ported cabinets for tight, even bass response. Every CA amp has a high frequency component for crisp, clear highs. On the CA6110DG model we include special features for live performance like XLR & 1/4 balanced line out with Level control which does not affect your stage volume. They also have ground lift on the Line Out, Tweeter Level control, Effects Loop and a two button footswitch for Internal Reverb/Effects and Chorus switching. Also included is a wide array of Reverbs, Delays, Chorus and Multiple Effects settings. Crate CA6110DG The Front Panel: 1: Input. The signal from a low impedance microphone or your acoustic instrument may be connected here by means of a shielded, balanced microphone cable terminated with an XLR connector or a shielded signal cable. This combo jack has 15 volts phantom power applied to XLR pins 2 and 3. (Mics not requiring phantom power will not be affected.) 2: Gain. This serves as the input level control for the Input jack (#1). For the best signal to noise ratio set this control so the Peak LED (#3) flashes on strong signals. 3: Peak. This LED flashes when the signal level into the preamp approaches clipping. Adjust the Gain control (#2) until a strong signal causes this LED to flash. 4: Low. This serves as the bass control. Adjust this control to get the best sounding bass response for this channel. Excessive boost of the low control can cause an unnatural howling and should be avoided. 5: Mid. This serves as the midrange control. Adjust this control to get the best projection and midrange tones for your instrument. The center point of the mid control is chosen by the setting of the Contour control (#6). 6: Contour. Use this control to set the center point of the Mid control (#5). Set this control at the frequency which gives you the most natural- sounding midrange tones. 7: High. This serves as the treble control. Adjust this control so your high notes and harmonic overtones are lively but not overpowering. 8: DSP/Eff Send. Use this control to adjust the amount of internal Digital Effect and/or external effect (if used). The Master Section - part one: 9: CD Input. Use these RCA jacks to connect a CD or tape player to the amplifier. Use the CD Level control (#10) to adjust the level of the player. 10: CD Level. Use this control to adjust the signal level at the CD Input jacks (#9). 11: Tweeter Cut. Use this control to reduce the output level of the internal high frequency driver. In t.
  SKU CRACA6110DG
$349.99
Crate CFS1
Crate CFS1
Crate CFS1 Crate CFS1 Description: Single Button Metal Crate Footswitch. The CFS1 is a single foot pedal for selected Crate box mixers and keyboard amps. Get your Crate CFS1 today!.
  SKU CRACFS1
$19.99
Crate CFS2
Crate CFS2
Crate CFS2 Crate CFS2 Description: Two Button Metal Crate Footswitch. Replacement footswitch for use with most 25, 30, and 65 watt Crate Amp Models. Get your Crate CFS2 today!.
  SKU CRACFS2
$29.99
Crate CFS3
Crate CFS3
Crate CFS3 Crate CFS3 Description: Three Button Metal Crate Footswitch. The CFP3 is Crate's most complete analog footpedal. Switches Channel, Reverb and Chorus on stereo chorus models, and Channel, Gain and DSP on/off on selected GFX models. Get your Crate CFS3 today!.
  SKU CRACFS3
$34.99
Crate FW120
Crate FW120
Crate FW120 Crate FW120 Description: If a combo amp with 60 watts and a single 12 speaker is a cool idea, then one with 120 watts and dual 12's must be double cool. We thought so too, that's why we designed and built FlexWave120 212™ the perfect stage amp for the pro or semi-pro gigging musician who needs driving power, multiple channels and built in effects. Its FlexWave™ Evolution 5 preamp uses our patented Sequential Cascading Gain™ technology to deliver 120 watts of fat, driving tone through two 12 speakers. Variable 3-channel operation allows you to switch among crystal clear clean, red-hot overdrive and screaming high gain channels via the included remote footswitch. With 18 DSP effects, Channel Tracking™ of your effects settings, and our proprietary Shape Control circuit for creating wicked custom leads, we must be twice the company of any other amp manufacturer. The Crate FlexWave120/212 three-channel guitar amplifier with advanced digital signal processing (DSP) and Channel Tracking. This rugged amplifier combines outstanding features with serious clean and distorted sounds. Digital Reverb, Delay, and Modulation effects provide you with a wide variety of sounds. Crate's unique Channel Tracking feature automatically stores your DSP settings for each channel to memory. As you switch from one channel to another, the DSP settings for the selected channel are instantly recalled. The supplied three-button footswitch allows you to select channels and change the DSP bank (Bank A/Bank B) by remote control. A front panel 1/8 stereo CD input jack allows you to play along with your CD player, MP3 player, or iPod. A rear panel insert jack allows you to add even more effects by connecting an external effect processor. Like all Crate products, your FlexWave120/212 amplifier is designed by musicians and built using only the best components. Extensive testing confirms that this amplifier is the absolute best it can be. In order to get the most out of your new amplifier, we strongly urge you to read this manual before you begin playing. Crate FW120 Features: 120 watts rms power output 2 x 12 speaker Three-Channel Operation -High Gain Channel -Overdrive Channel -Clean Channel 3-band EQ on the Overdrive and Clean Channels Proprietary Shape EQ control on the High Gain Channel DSP Effects including Delay, Modulation, and Reverb sections CD Input Effects Loop 3-Function Footswitch included External Speaker jack Built-in Chromatic Tuner Channel Tracking Your Crate FlexWave120/212 gives you the power of Channel Tracking. Once you select a DSP setting for each channel, Channel Tracking stores the settings to memory whenever you change channels. When you go back to that channel, Channel Tracking recalls those DSP settings automatically, without changing the DSP controls! For example: 1.Select the Clean channel. Set the Mod control to Flanger, the Delay control to Medium, and adjust the Reverb control to your preference. .
  SKU CRAFW120
$379.99
Crate FW120H
Crate FW120H
Crate FW120H Crate FW120H Description: Dig if you will the awesome FlexWave120H head. If sheer volume combined with tone so outstanding it should be declared illegal is the action you crave, then put the FlexWave120H at the top of your shopping list. Producing 120 watts of savage power while sporting three channels and built in effects, it's the perfect head for the gigging maniac. We guess you could use it in your bedroom too if you didn't mind re-plastering the walls every week. The FlexWave120H's FlexWave™ Evolution 5 preamp uses our patented Sequential Channel Tracking™ technology, for a tone with so much balls, it needs a jockstrap. Variable 3-channel operation allows you to switch between twangadelic clean, hot-as-freaking-heck overdrive and tortured high gain channels via the remote footswitch we lovingly pack with each and every unit. With 18 stereo DSP effects, Channel Tracking™ of effects settings, and our proprietary Shape Control circuit for sculpting wicked custom leads, it's statistically impossible to dial up a lame sound. We highly recommend our Crate FW412A/B 4x12 cabinets for projecting the bold power of the FlexWave120H head into the skulls of your rapt listening public. The Crate FlexWave120H three-channel guitar amplifier with advanced digital signal processing (DSP) and Channel Tracking. This rugged amplifier combines outstanding features with serious clean and distorted sounds. Digital Reverb, Delay, and Modulation effects provide you with a wide variety of sounds. Crate's unique Channel Tracking feature automatically stores your DSP settings for each channel to memory. As you switch from one channel to another, the DSP settings for the selected channel are instantly recalled. The supplied three-button footswitch allows you to select channels and change the DSP bank (Bank A/Bank B) by remote control. A front panel 1/8 stereo CD input jack allows you to play along with your CD player, MP3 player, or iPod. A rear panel insert jack allows you to add even more effects by connecting an external effect processor. Like all Crate products, your FlexWave120H amplifier is designed by musicians and built using only the best components. Extensive testing confirms that this amplifier is the absolute best it can be. In order to get the most out of your new amplifier, we strongly urge you to read this manual before you begin playing. Crate FW120H Features: 120 watts rms power output Three-Channel Operation -High Gain Channel -Overdrive Channel -Clean Channel 3-band EQ on the Overdrive and Clean Channels Proprietary Shape EQ control on the High Gain Channel DSP Effects including Delay, Modulation, and Reverb sections CD Input Effects Loop 3-Function Footswitch included External Speaker jack Built-in Chromatic Tuner Channel Tracking: Your Crate FlexWave120H gives you the power of Channel Tracking. Once you select a DSP setting for each channel, Channel Tracking stores the settings to memory whenever you change c.
  SKU CRAFW120H
$299.99
Crate FW120HS
Crate FW120HS
Crate FW120HS Crate FW120HS Description: This Half-Stack includes the Crate FlexWave FW120H Guitar Amp Head and FlexWave Series FW412 Guitar Cabinet. The FlexWave120H is the perfect stage guitar stack top for the pro or semi-pro gigging musician who needs driving power, multiple channels and built-in effects. Its FlexWave™ Evolution 5 preamp uses patented Sequential Cascading Gain™ technology to pump 120W of fat, driving tone through your speaker cab. Variable 3-channel operation allows you to switch among crystal clear clean, red-hot overdrive and screaming high gain channels from the included remote footswitch. A built-in tuner ensures you're constantly in tune. With DSP effects, Channel Tracking of effects settings, and a proprietary Shape Control circuit for creating wicked custom leads, it's uited perfectly to the Crate G412A/B 4x12 cabinets. More than 25 years of award-winning engineering prowess led Crate to develop the remarkably responsive FlexWave Evolution 5. Sequential Cascading Gain™ technology that yields rich, articulate tone that's fully customizable with onboard effects. Get everything from crystal clear cleans to white-knuckle distortion. For sweet tone and roadworthy construction, it's hard to find a better value. Capture raw stereo power with the FW412A and FW412B speaker cabinets from Crate. Compatible with any Crate head, including the FlexWave120H, and designed for the next generation of rock players, these 4x12 cabs are available in slanted (FW412A) and straight (FW412B) models and can process everything from sparkling cleans to face-melting distortion. Their 120-watts of power handling operate in both Stereo or Mono at 4 or 8 ohms. Crate FW120H Guitar Amp Head 3 channels 120 watts Evolution 5 preamp DSP effects Onboard tuner Crate FW412 Guitar Cabinet Compatible with all Crate heads 4x12 speakers 120W power handling Stereo or Mono operation 4 or 8 Ohms Crate FW120HS Specifications: Output Power Rating 120W rms 5% THD into 4 ohm load, 120 VAC Gain High Gain Channel 110 dB, all controls 10 Overdrive Ch 88 dB, all controls 10 Clean Ch 58 dB, all controls 10 CD Input 29 dB Maximum Input Signal Accepted 2.5 volts rms 400 Hz Input Impedance 470k ohm High Gain Channel Shape Control Proprietary Circuit Overdrive Channel Low 20 dB range 80 Hz Mid 15 dB range 1 kHz High 20 dB range 10 kHz Clean Channel Low 36 dB range 80 Hz Mid 15 dB range 800 Hz High 40 dB range 10 kHz External Speaker: 4 ohm minimum nominal impedance Power Requirements 120 VAC, 60 Hz, 95 VA 100/115 VAC, 50/60 Hz, 95 VA 230/240 VAC, 50/60 Hz, 95 VA Size (H x W x D) 10.2 in/25.9 cm x 29.8 in/75.7 cm x 10.5 in/26.7 cm Weight 27.8 lb/12.6 kg Get your Crate FW120HS today!.
  SKU CRAFW120HS
$499.99
Crate FW15
Crate FW15
Crate FW15 Crate FW15 Description: The FlexWave15 is a compact, two-channel 15-watt combo that gives you awesome clean and blistering distortion tones, thanks in no small part to our FlexWave™ Evolution 5 preamp with patented Sequential Cascading Gain technology. FlexWave15's 8 speaker is optimized for maximum efficiency with the highly engineered closed-back cabinet, producing a loud and punchy thump you'd swear came from a half stack. A stereo input lets you jack in a CD or MP3 player and jam along with your favorite songs, while a headphone jack lets you practice at any hour, without the police knowing your address from memory. Onboard 3-band EQ provides dynamic tone control, while the external output can power an additional speaker. This super versatile mini-combo weighs in at just 15 pounds, so you can carry it with ease and avoid developing muscles that would destroy your carefully crafted emaciated rocker image. This rugged amplifier combines outstanding features with serious clean and distorted sounds.The three-band EQ lets you tailor the sound for your individual style. A stereo mini-jack input allows connection of a CD or tape player for playing along with your favorite music, and the headphones jack lets you practice in private. In order to get the most out of your new amplifier, we strongly urge you to read this manual before you begin playing. Crate FW15 Features: 15 watts rms power output 1 x 8 speaker Two-Channel Operation -Clean Channel -Overdrive Channel 3-band EQ CD Input Headphone Out External Speaker jack The Front Panel: 1. INPUT: Use this jack to connect your guitar to the amplifier by means of a shielded instrument cable. OVERDRIVE CHANNEL: A high gain channel giving you sounds from a slight edge to serious overdrive. 2. GAIN: Use this control to adjust the amount of distortion for the Overdrive channel. 3. LEVEL: Use this control to adjust the output level of the Overdrive channel. 4. OVERDRIVE/CLEAN: Use this switch to select the Overdrive or Clean channel. With the switch in the out position, the Clean channel is selected. When the switch is depressed, the Overdrive channel is selected. CLEAN CHANNEL: A normal gain channel designed to give you crystal clear sounds to medium distortion. 5. VOL: Use this control to adjust the output level of the Clean channel. 6. LOW: This adjusts the bass frequencies.Use this control to get the best sounding bass response for your instrument. 7. MID: This adjusts the midrange frequencies. Use this control to get the best projection and midrange tones for your instrument. 8. HIGH: This adjusts the treble frequencies. Use this control to attain a bright and lively sound for your instrument. 9. CD INPUT: Use this 1/8 stereo mini jack to connect the output from a CD player, MP3 player, laptop, etc., to the amplifier. The signal at this jack is summed into a mono signal, which is sent to the internal power amp circuit. Use the output level control from the signal source to adjust .
  SKU CRAFW15
$69.99
Crate FW15R
Crate FW15R
Crate FW15R Crate FW15R Description: Like the FlexWave15, FlexWave15R is a compact, two-channel 15-watt combo that gives you awesome clean and blistering distortion tones, thanks in no small part to our FlexWave™ Evolution 5 preamp with patented Sequential Cascading Gain technology. FlexWave15R has a 12 speaker optimized for maximum efficiency with the highly engineered closed-back cabinet, producing a loud and punchy thump you'd swear came from a half stack. A stereo input lets you jack in a CD or MP3 player and jam along with your favorite songs, while a headphone jack lets you practice at any hour, without the police knowing your address from memory. Onboard 3-band EQ provides dynamic tone control, while the external output can power an additional speaker, so you can carry it with ease. And it has a great sounding built in reverb so you can get your surf on. Cowabunga! This rugged amplifier combines outstanding features with serious clean and distorted sounds. The built-in spring reverb provides that classic reverb sound for added depth and greater flexibility. A stereo mini-jack input allows connection of a CD or tape player for playing along with your favorite music, and the headphones jack lets you practice in private. In order to get the most out of your new amplifier, we strongly urge you to read this manual before you begin playing. Crate FW15R Features: 15 watts rms power output 1 x 12 speaker Two-Channel Operation -Clean Channel -Overdrive Channel 3-band EQ Spring reverb with Level control CD Input Headphone Out External Speaker jack The Front Panel: 1. INPUT: Use this jack to connect your guitar to the amplifier by means of a shielded instrument cable. OVERDRIVE CHANNEL: A high gain channel giving you sounds from a slight edge to serious overdrive. 2. GAIN: Use this control to adjust the amount of distortion for the Overdrive channel. 3. LEVEL: Use this control to adjust the output level of the Overdrive channel. 4. OVERDRIVE/CLEAN: Use this switch to select the Overdrive or Clean channel. With the switch in the out position, the Clean channel is selected. When the switch is depressed, the Overdrive channel is selected. CLEAN CHANNEL: A normal gain channel designed to give you crystal clear sounds to medium distortion. 5. VOL: Use this control to adjust the output level of the Clean channel. 6. LOW: This adjusts the bass frequencies. Use this control to get the best sounding bass response for your instrument. 7. MID: This adjusts the midrange frequencies. Use this control to get the best projection and midrange tones for your instrument. 8. HIGH: This adjusts the treble frequencies. Use this control to attain a bright and lively sound for your instrument. 9. REV LEVEL: Use this control to adjust the level of the spring reverb effect. 10. CD INPUT: Use this 1/8 stereo mini jack to connect the output from a CD player, MP3 player, laptop, etc., to the amplifier. The signal at this jack is summed into a mono signal, whic.
  SKU CRAFW15R
$99.99

"A reliable trustworthy company"
Mandy Lydia , Iowa, IA.

"Impressive selection of Instruments. Fast shipping".
Wayne G., Colorado, CO

"Frontierinstruments.com has the cheapest prices, and the best customer service - I'd recommend them to anyone"
Lisbeth Kamal ., MIAMI, CA

 
frontier instruments (frontierinstruments.com) is a registered trademark of Music Unlimited. All Rights Reserved. Publisher does not accept liability for incorrect spelling, printing errors (including prices), incorrect manufacturer specifications or changes, or grammatical inaccuracies in any product included in the website. Prices subject to change without notice.