Frontierinstruments.com
     
    Search on site:  
 
 
Brands
Products
Crown  PCC160
Crown PCC160
Crown PCC160 Crown PCC160 Description: The Crown PCC®-160 (Phase Coherent Cardioid ®) is a surface-mounted supercardioid microphone intended for professional applications on stage floors, lecterns, conference tables, and news desks-wherever improved gain-beforefeedback and articulation are important. Similar to the Pressure Zone Microphone® (PZM®), the PCC is designed to be used on a relatively large boundary surface. Unlike the PZM, the Phase Coherent Cardioid uses a subminiature supercardioid mic capsule. Its directional polar pattern improves gain-before-feedback, reduces unwanted room noise and rejects sounds from the rear. Surface-mounting creates a half-supercardioid polar pattern and increases directivity 3 dB. Since the microphone capsule is placed on a boundary, direct and reflected sounds arrive at the diaphragm in-phase. This coherent addition of direct and reflected waves increases sensitivity 6 dB and prevents phase cancellations. The mic capsule is small enough to ensure phase coherency up to the highest frequencies in the audible spectrum, resulting in a wide, smooth frequency response free of phase interference. Clarity and reach are also enhanced. Self-contained electronics eliminate the need for an in-line Preamp box. The PCC-160 can be phantom powered directly from the console or other remote power source providing 12 to 48 volts. If battery power is required, a battery supply unit can be inserted anywhere in the mic line right up to the console or Mixer. A bass tilt switch allows the user to tailor the low-end response for particular applications. Thanks to its low profile and black finish, the microphone becomes almost invisible in use. A side-mounted connector complements the form factor of the PCC-160, allowing the unit to be placed effectively at the stage edge, at the top of a lectern or in other tight spots. If desired, the cable can be hard-wired for bottom entry. Get your Crown PCC160 today!.
  SKU CROPCC160
$295.99
Crown 1160A
Crown 1160A
Crown 1160A Crown 1160A Description: The Crown 180A, 280A, 1160A and 660A are high-value amplifiers for commercial and industrial audio. They provide 4-ohm and constant-voltage outputs (70V and 100V). The 660A, a six-channel amplifier, provides 4-ohm and constant-voltage outputs (70V and 100V) on channels 1 through 4, and 4-ohm outpus on channels 5 and 6. The amps are part of Crown's Commercial Audio Series, which also includes mixers and mixer-amps. These low-cost units provide all necessary features in a simple building-block format. The sound system can be upgraded as a facility expands. For example, you can add more mixers for more inputs, or add more power amps (or mixer-amps) to handle more zones. Some applications include schools, hospitals, factories, restaurant/retail, houses of worship, fitness facilities, A/V boardrooms, prisons, and small offices. Typical uses are paging, background music, security and evacuation instructions. Crown 1160A Features: Ideal for commercial and industrial use Expandable by adding Crown Commercial Audio Series mixers or mixer-amplifiers Balanced Phoenix-type inputs; touch-proof screw-terminal speaker outputs Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications Get your Crown 1160A today!.
  SKU CRO1160A
$432
Crown 1160MA
Crown 1160MA
Crown 1160MA Crown 1160MA Description: Crown's Commercial Audio mixer/amplifiers deliver legendary Crown quality to the commercial audio industry. These high-value mixer/amplifiers provide both 4-ohm and constant-voltage outputs (70V and 100V) for use in a wide range of commercial applications including schools, hospitals, factories, restaurant/retail, houses of worship, fitness facilities, A/V boardrooms, prisons, and small offices. Easily configured for a range of uses such as paging, background music, security, and evacuation instructions, Crown's Commercial Audio units are the smart choice for commercial sound. The 1160MA has 4 inputs and one 160W power amplifier Crown 1160MA Features: 4 to 8 inputs, 1 to 2 amplifier output channels Ideal for commercial and industrial use Expandable by adding Crown Commercial Audio Series mixers or power amplifiers Balanced Phoenix-type mic/line inputs; touch-proof screw-terminal speaker outputs Any input can be sent to any output Built-in four-tone generator Priority muting Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications Get your Crown 1160MA today!.
  SKU CRO1160MA
$532
Crown 140MPA
Crown 140MPA
Crown 140MPA Crown 140MPA Description: The Crown 140MPA is a high-value mixer-amplifier for commercial audio. It provides 4-ohm and constant-voltage outputs (25V and 70V). Typical uses are paging, background music, and music-on-hold. The unit provides 4 inputs (each with a volume control) and a 40W amplifier output. Other features include priority ducking, phantom power, and capability for remote volume control. Multiple units can be linked. Crown 140MPA Features: 4 inputs (each with a volume control), one 40W amplifier output channel Ideal for paging, background music, and music-on-hold Balanced Phoenix-type mic/line inputs, telephone input, dual RCA stereo music inputs, touch-proof screw-terminal speaker outputs Priority ducking Independent bass and treble controls for each input Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications Get your Crown 140MPA today!.
  SKU CRO140MPA
$399
Crown 14M
Crown 14M
Crown 14M Crown 14M Description: The 14M, part of the Commercial Audio Series from Crown Audio, is a rack-mountable preamplifier/mixer ideal for use in factories, schools, hospitals, restaurants, offices, and other venues. It features four mic/line inputs with stereo RCA jacks and balanced phoenix-type connectors and a single output with a balanced phoenix-type connector. Priority muting is included for paging. Individual volume, bass, and treble controls are provided for each input. LED signal indicators are provided for each input and the output. A built-in tone generator provides bell, pre-announce chime, alert, and evacuate tones. Crown 14M Features: Four input channels, each with stereo RCA jacks and balanced phoenix-type connectors One output channel with a balanced phoenix-type connector Priority muting for paging Built-in four tone generator Signal indicator LEDs Level, bass, and treble controls for each input Phantom power Crown 14M Specifications: Frequency Response 20Hz - 20kHz Signal to Noise Ratio 100 dB Total Harmonic Distortion (THD) 0.05% (Typical) Input Sensitivity Balanced Mic: 3mV Balanced Line: 800mV RCA: 400mV Input Impedance Mic: 400 ohms Line: 100 k ohms RCA: 50 k ohms Crosstalk -50 dB Output Level 1.2V Phantom Power 15VDC Controls Front Panel 1 x Power Switch 4 x Input Volume Control Knobs 4 x Bass Controls 4 x Treble Controls 1 x Output Volume Control Knob Controls Rear Panel 1 x Mixer Config. DIP Switch (For Priority Muting and Phantom Power) 4 x Mic/Line Selector Switches 1 x Output Tone Control Potentiometer Indicators Green LEDs for Input and Output Signals on Front Panel Red Clip Indicator LED Blue Power Indicator LED Connectors 1 x AC Power Inlet 1 x 2-Position Terminal Strip (24VDC Backup Power) 1 x 3-Pin Phoenix Connector for Priority Muting 1 x 3-Pin Balanced Phoenix Output Connector 1 x 5-Pin Phoenix Connector for Tone Generator 4 x Balanced 3-Pin Phoenix Input Connectors 4 x RCA Stereo Input Pairs (8 Jacks Total) Dimensions (WxHxD) 19 x 1.75 x 10.7 (483 x 45 x 272mm) Weight 8.7 lbs (3.9 kg) Get your Crown 14M today!.
  SKU CRO14M
$294
Crown 180A
Crown 180A
Crown 180A Crown 180A Description: Crown's Commercial Audio amplifiers deliver legendary Crown quality to the commercial audio industry. These high-value amplifiers provide both 4-ohm and constant-voltage outputs (70V and 100V) for use in a wide range of commercial applications including schools, hospitals, factories, restaurant/retail, houses of worship, fitness facilities, A/V boardrooms, prisons, and small offices. Easily configured for a range of uses such as paging, background music, security, and evacuation instructions, Crown's Commercial Audio units are the smart choice for commercial sound. Some applications include schools, hospitals, factories, restaurant/retail, houses of worship, fitness facilities, A/V boardrooms, prisons, and small offices. Typical uses are paging, background music, security and evacuation instructions. 180A has 1 input and one 80W power amplifier for single-zone systems. Crown 180A Features: Ideal for commercial and industrial use Expandable by adding Crown Commercial Audio Series mixers or mixer-amplifiers Balanced Phoenix-type inputs; touch-proof screw-terminal speaker outputs Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications Get your Crown 180A today!.
  SKU CRO180A
$310
Crown 180MA
Crown 180MA
Crown 180MA Crown 180MA Description: Crown's Commercial Audio mixer/amplifiers deliver legendary Crown quality to the commercial audio industry. These high-value mixer/amplifiers provide both 4-ohm and constant-voltage outputs (70V and 100V) for use in a wide range of commercial applications including schools, hospitals, factories, restaurant/retail, houses of worship, fitness facilities, A/V boardrooms, prisons, and small offices. Easily configured for a range of uses such as paging, background music, security, and evacuation instructions, Crown's Commercial Audio units are the smart choice for commercial sound. The 180MA has 4 inputs and one 80W power amplifier Crown 180MA Features: 4 to 8 inputs, 1 to 2 amplifier output channels Ideal for commercial and industrial use Expandable by adding Crown Commercial Audio Series mixers or power amplifiers Balanced Phoenix-type mic/line inputs; touch-proof screw-terminal speaker outputs Any input can be sent to any output Built-in four-tone generator Priority muting Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications Get your Crown 180MA today!.
  SKU CRO180MA
$415
Crown 180MAx
Crown 180MAx
Crown 180MAx Crown 180MAx Description: The 180MAx is the first integrated tuner mixer-amplifier designed for commercial use. Applications include restaurants, retail stores, coffee shops and other commercial establishments. Built into the 180MAx is an XM Radio tuner that receives satellite radio stations with digital sound quality. A front-panel LCD screen displays XM Radio channel data (channel number, channel name, artist name, song title), 16 station presets and signal strength. The unit also accepts signals from line, telephone, or microphone (phantom power included). Bass and treble controls allow the user to tailor the tone quality of the sound system. The priority ducking feature drops the volume of the background music when a microphone is used. A VOX sensitivity setting controls how loud the voice must be before ducking occurs. Units can be linked to increase the number of input and output channels. The built-in power amplifier provides 80 watts into 4-ohm and 25V/70V outputs for sound system loudspeakers. Current and thermal limiting protect the amplifier and loudpeakers from accidental overload. Crown 180MAx Features: Ideal for commercial and industrial use 4 inputs (each with a volume control) and one 80W amplifier output channel Independent bass and treble controls for each input Balanced Phoenix-type mic/line inputs; touch-proof screw-terminal speaker outputs Programmable XM tuner with XM channel data display Priority ducking Music-On-Hold outputs Three-Year, no-fault, fully transferable warranty completely protects your investment and guarantees its specifications Crown 180MAx Specifications: Frequency Reponse (at 1 watt from 4-ohm tap): 70 Hz to 19 kHz ±1 dB. Frequency Response (at line out): 20Hz to 20kHz ±1 dB. Power Bandwidth (at 4-ohm tap, 2 dB below maxium 1 kHz power): 50 Hz to 20 kHz with < 0.5% THD Signal to Noise Ratio (ref. to rated power, master volume at minimum): 85dB DC Output Offset: < ±5 mV THD: Less than 0.5% at rated power at 1 kHz. Input Sensitivity (for full output at maximum gain): Balanced mic inputs: 3mV Balanced line inputs: 800mV RCA connectors: 400mV Isolated telephone input: 75 mV Input Impedance (nominal): Mic: 400 ohms Line: 100 kilohms RCA: 50 kilohms Telephone: 600 ohms Crosstalk: 70dB at 1kHz Line Output Level (nominal): 1V into 10 kilohms Phantom Power: 15 VDC AC Line Voltages Available: 120V, 60 Hz. Line voltage tolerance +10%, 20% Operating Temperature/Humidity: 0ř C to 40oslash; C at 95% relative humidity (non-condensing). Storage Temperature: 20oslash; C to 85oslash; C. Front Panel Controls and Indicators Power Switch: Pushbutton on-off switch Input Volume Controls: Four detented potentiometers with knobs Input 1: Microphone/line (switchable)/telephone Inputs 2 and 3: Line Input 4: XM radio Tone Controls: Bass and Treble non-detented recessed potentiometers on each input channel Bass ±10dB at 100Hz, Treble ±10dB at 1.
  SKU CRO180MAX
$849
Crown 180MAxPACK
Crown 180MAxPACK
Crown 180MAxPACK Crown 180MAxPACK Description: The 180MAx is the first integrated tuner mixer-amplifier designed for commercial use. Applications include restaurants, retail stores, coffee shops and other commercial establishments. The system includes the Crown 180MAx tuner-mixer-amplifier, four JBL© Control© 1ST 2-way miniature loudspeakers with built-in 25V/70V transformers, XM antenna, and a wireless remote control. Built into the 180MAx is an XM Radio tuner that receives satellite radio stations with digital sound quality. A front-panel LCD screen displays XM Radio channel data (channel number, channel name, artist name, song title), 16 station presets and signal strength. The unit also accepts signals from line, telephone, or microphone (phantom power included). Bass and treble controls allow the user to tailor the tone quality of the sound system. The priority ducking feature drops the volume of the background music when a microphone is used. A VOX sensitivity setting controls how loud the voice must be before ducking occurs. Units can be linked to increase the number of input and output channels. The built-in power amplifier provides 80 watts into 4 ohms, 25V and 70V for use with the JBL Control 1ST loudspeakers. Current and thermal limiting protect the amplifier and loudpeakers from accidental overload. Crown 180MAxPACK Features: Ideal for commercial and industrial use 4 inputs (each with a volume control) and one 80W amplifier output channel Independent bass and treble controls for each input Balanced Phoenix-type mic/line inputs; touch-proof screw-terminal speaker outputs Programmable XM tuner with XM channel data display Priority ducking Music-On-Hold outputs Four JBL Control 1ST 2-way miniature speakers with transformer and mounting brackets included Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications Crown 180MAxPACK Specifications: 180 MAx Amp Frequency Reponse (at 1 watt from 4-ohm tap): 70Hz to 19kHz ±1dB. Frequency Response (at line out): 20Hz to 20kHz ±1dB Power Bandwidth (at 4-ohm tap, 2dB below maxium 1 kHz power): 50Hz to 20kHz with < 0.5% THD Signal to Noise Ratio (ref. to rated power, master volume at minimum): 85dB DC Output Offset: < ±5 mV THD: Less than 0.5% at rated power at 1 kHz. Input Sensitivity (for full output at maximum gain): Balanced mic inputs: 3mV Balanced line inputs: 800mV RCA connectors: 400mV Isolated telephone input: 75 mV Input Impedance (nominal): Mic: 400 ohms Line: 100 kilohms RCA: 50 kilohms Telephone: 600 ohms Crosstalk: 70dB at 1kHz Line Output Level (nominal): 1V into 10 kilohms Phantom Power: 15 VDC AC Line Voltages Available: 120V, 60 Hz. Line voltage tolerance +10%, 20% Operating Temperature/Humidity: 0ř C to 40ř C at 95% relative humidity (non-condensing). Storage Temperature: 20ř C to 85ř C. Front Panel Controls and Indicators Power Swi.
  SKU CRO180MAXP
$1099
Crown 1VCAP
Crown 1VCAP
Crown 1VCAP Crown 1VCAP Description: Crown 1VCAP Volume Control Used in conjunction with a VCA-MC module, this is a single gang panel with one potentionmeter that provides remote volume control for one or more CT's amplifier channels. The potentionmeter on the panel is wired directly to the VCA connectors on the VCA-MC. The 1-VCAP and 4-VCAP wall-mounted panels provide remote volume control for one or more VCA-controlled channels. The 1-VCAP is a 1-gang panel with one potentiometer, and the 4-VCAP is a 2-gang panel with four potentiometers. The potentiometers on the panel are wired directly to the VCA connectors on the VCA-MC module accessories for CTs 4- and 8-channel amplifiers, or to the VCA connections on Commercial Audio Series products. 1-VCAP: See Figure 1. Used in conjunction with a VCA-MC module, this is a single-gang panel with one potentiometer that provides remote volume control for one or more CTs amplifi er channels. The potentiometer on the panel is wired directly to the VCA connectors on the VCA-MC. Crown 1VCAP Specifications: Number of Potentiometers: 1 Potentiometer Resistance: 5 k ohms Pins: VCA, GND, +10V Weight: 3.0 oz (85 g) Dimensions: 2-1/2 in x 4-1/2 in (6.4 cm x 11.4 cm) (Fits into a 1-gang electrical box.) Get your Crown 1VCAP product today!.
  SKU CRO1VCAP
$44.99
Crown 280A
Crown 280A
Crown 280A Crown 280A Description: The Crown 180A, 280A, 1160A and 660A are high-value amplifiers for commercial and industrial audio. They provide 4-ohm and constant-voltage outputs (70V and 100V). The 660A, a six-channel amplifier, provides 4-ohm and constant-voltage outputs (70V and 100V) on channels 1 through 4, and 4-ohm outpus on channels 5 and 6. The amps are part of Crown's Commercial Audio Series, which also includes mixers and mixer-amps. These low-cost units provide all necessary features in a simple building-block format. The sound system can be upgraded as a facility expands. For example, you can add more mixers for more inputs, or add more power amps (or mixer-amps) to handle more zones. Some applications include schools, hospitals, factories, restaurant/retail, houses of worship, fitness facilities, A/V boardrooms, prisons, and small offices. Typical uses are paging, background music, security and evacuation instructions. Crown 280A Features: Ideal for commercial and industrial use Expandable by adding Crown Commercial Audio Series mixers or mixer-amplifiers Balanced Phoenix-type inputs; touch-proof screw-terminal speaker outputs Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications Get your Crown 280A today!.
  SKU CRO280A
$445
Crown 280MA
Crown 280MA
Crown 280MA Crown 280MA Description: Crown's Commercial Audio mixer/amplifiers deliver legendary Crown quality to the commercial audio industry. These high-value mixer/amplifiers provide both 4-ohm and constant-voltage outputs (70V and 100V) for use in a wide range of commercial applications including schools, hospitals, factories, restaurant/retail, houses of worship, fitness facilities, A/V boardrooms, prisons, and small offices. Easily configured for a range of uses such as paging, background music, security, and evacuation instructions, Crown's Commercial Audio units are the smart choice for commercial sound. Crown 280MA Features: 4 to 8 inputs, 1 to 2 amplifier output channels Ideal for commercial and industrial use Expandable by adding Crown Commercial Audio Series mixers or power amplifiers Balanced Phoenix-type mic/line inputs; touch-proof screw-terminal speaker outputs Any input can be sent to any output Built-in four-tone generator Priority muting Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications Get your Crown 280MA today!.
  SKU CRO280MA
$600
Crown 28M
Crown 28M
Crown 28M Crown 28M Description: The 28M, part of the Commercial Audio Series from Crown Audio, is a rack-mountable preamplifier/mixer ideal for use in factories, schools, hospitals, restaurants, offices, and other venues. It features eight mic/line inputs with stereo RCA jacks and balanced phoenix-type connectors and two outputs with balanced phoenix-type connectors. Priority muting is included for paging. Individual volume, bass, and treble controls are provided for each input. LED signal indicators are provided for each input and the output. A built-in tone generator provides bell, pre-announce chime, alert, and evacuate tones. Crown 28M Features: Eight input channels, each with stereo RCA jacks and balanced phoenix-type connectors Two output channels with balanced phoenix-type connectors Each input may be assigned to any combination of outputs Priority muting for paging Built-in four tone generator Signal indicator LEDs Level, bass, and treble controls for each input Phantom power Crown 28M Specifications: Frequency Response 20Hz - 20kHz Signal to Noise Ratio 100 dB Total Harmonic Distortion (THD) 0.05% (Typical) Input Sensitivity Balanced Mic: 3mV Balanced Line: 800mV RCA: 400mV Input Impedance Mic: 400 ohms Line: 100 k ohms RCA: 50 k ohms Crosstalk -50 dB Output Level 1.2V Phantom Power 15VDC Controls Front Panel 1 x Power Switch 8 x Input Volume Control Knobs 8 x Bass Controls 8 x Treble Controls 2 x Output Volume Control Knobs Controls Rear Panel 1 x Mixer Config. DIP Switch (For Priority Muting and Phantom Power) 8 x Mic/Line Selector Switches 2 x Output Tone Control Potentiometers 16 x Input Routing Dipswitches Indicators Green LEDs for Input and Output Signals on Front Panel Red Clip Indicator LED Blue Power Indicator LED Connectors 1 x AC Power Inlet 1 x 2-Position Terminal Strip (24VDC Backup Power) 1 x 3-Pin Phoenix Connector for Priority Muting 2 x 3-Pin Balanced Phoenix Output Connectors 1 x 5-Pin Phoenix Connector for Tone Generator 8 x Balanced 3-Pin Phoenix Input Connectors 8 x RCA Stereo Input Pairs (16 Jacks Total) Dimensions (WxHxD) 19 x 1.75 x 10.7 (483 x 45 x 272mm) Weight 8.7 lbs (3.9 kg) Get your Crown 28M today!.
  SKU CRO28M
$405
Crown 3PLUS3
Crown 3PLUS3
Crown 3PLUS3 Crown 3PLUS3 Description: Extends Crown's Three Year, No-Fault, Full Warranty for another Three Years. For Crown Amplifiers Only. Get your Crown 3PLUS3 product today!.
  SKU CRO3P3
$94.57
Crown 4VCAP
Crown 4VCAP
Crown 4VCAP Crown 4VCAP Description: Crown 4VCAP Volume Control The 1-VCAP and 4-VCAP wall-mounted panels provide remote volume control for one or more VCA-controlled channels. The 1-VCAP is a 1-gang panel with one potentiometer, and the 4-VCAP is a 2-gang panel with four potentiometers. The potentiometers on the panel are wired directly to the VCA connectors on the VCA-MC module accessories for CTs 4- and 8-channel amplifiers, or to the VCA connections on Commercial Audio Series products. This is a two gang panel with four potentiometers that provide remote volume control for four or more CT's amplifier channels. The potentionmeters on the panel are wired directly to the VCA connectors on the VCA-MC. 4-VCAP: See Figure 2. This is a two-gang panel with four potentiometers that provide remote volume control for four or more CTs amplifier channels. The potentiometers on the panel are wired directly to the VCA connectors on the VCA-MC. Crown 4VCAP Specifications: Number of Potentiometers: 4 Potentiometer Resistance: 5 k ohms Pins: VCA, GND, +10V (x4) Weight: 6.5 oz (184 g) Dimensions: 4-1/2 in x 4-1/2 in (11.4 cm x 11.4 cm) (Fits into a 2-gang electrical box.) Get your Crown 4VCAP product today!.
  SKU CRO4VCAP
$219.99
Crown 660A
Crown 660A
Crown 660A Crown 660A Description: This highly efficient Amplifier includes a powersharing design that provides extra power to channels where it's needed most. A discrete component power design employs rugged, high-current metal output transistors for maximum reliability. The super-quiet, variable speed fan operates according to thermal demand, while the front-panel air intakes provide the most efficient cooling in any rack. The CP660 brings you maximum flexibility for confi guration, with six independent amplifier channels. Each pair of output channels can be bridged, using convenient switches on the back panel, to provide three, four or five channels with higher output power. In addition, each Channel includes its own back-panel gain control for convenient system balancing. Barrier strip connectors are provided for the inputs, and heavy-duty 5-way Binding posts allow secure output connections. Plus, your investment in a CP660 is backed by Crown's unequaled Three-Year, No-Fault, Full Warranty that covers everything. Get your Crown 660A today!.
  SKU CRO660A
$1389
Crown CDI 1000
Crown CDI 1000
Crown CDI 1000 Crown CDI 1000 Description: The Crown CDI1000 (CDI-1000) 2-Cnennal Amplifier are professional tools designed and built for installed sound applications. CDi stands for Contractor Digital Intelligence. The series includes two models which are identical except for output power: CDI1000 rugged and lightweight, and offer unmatched value in their class. The CDI1000 amplifiers feature an LCD screen with DSP speaker presets for crossover frequencies, EQ, limiting, compression, delay, and a subharmonic synthesizer. Other features include a switch-mode universal power supply, useful function indicators, proportional-speed fan-assisted cooling, removable Phoenixstyle inputs, barrier strip outputs for low-Z or 70V/140V loads, short-circuit protection and more. Crown CDI 1000 Features: Accurate, uncolored sound with very low distortion for the best in music and voice reproduction Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults Extremely versatile, handling a wide range of speaker impedances and outputs Switch-mode universal power supply Integrated DSP with LCD front panel display Speaker presets for crossover frequencies, EQ, limiting, compression, delay, and subharmonic synthesis All products fi ll 2U rack spaces and weigh under 19 pounds Barrier strip outputs for low-Z or 70V/140V loads, removable Phoenix-style inputs Get your Crown CDI 1000 today!.
  SKU CROCDI1000
$982
Crown CDI 2000
Crown CDI 2000
Crown CDI 2000 Crown CDI 2000 Description: The Cdi Series of Crown amplifiers are professional tools designed and built for installed sound applications. Cdi stands for Contractor Digital Intelligence. The series includes two models which are identical except for output power: Cdi 1000 and Cdi 2000. Both are rugged and lightweight, and offer unmatched value in their class. Cdi Series amplifiers feature an LCD screen with DSP speaker presets for crossover frequencies, EQ, limiting, compression, delay, and a subharmonic synthesizer. Other features include a switch-mode universal power supply, useful function indicators, proportional-speed fan-assisted cooling, removable Phoenix-style inputs, barrier strip outputs for low-Z or 70V/140V loads, short-circuit protection and more. A three year, no-fault, fully-transferable warranty completely protects your investment and guarantees its specifications. Crown CDI 2000 Features: Accurate, uncolored sound with very low distortion for music and voice reproduction Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults Extremely versatile, handling a wide range of speaker impedances and outputs Integrated DSP with LCD front panel display Speaker presets for crossover frequencies, EQ, limiting, compression, delay, and subharmonic synthesis Switch-mode universal power supply Barrier strip outputs for low-Z or 70V/140V loads, removable Phoenix-style inputs Three year warranty HiQnet USB Connector: Type B, connects to a HiQnet network Get your Crown CDI 2000 today!.
  SKU CROCDI2000
$1332
Crown CM-311AE
Crown CM-311AE
Crown CM-311AE Crown CM-311AE Description: The CM Series of condenser microphones by Crown offer exceptional quality at truly affordable prices. With application-specific microphones, ranging from professional-grade headworn microphones to critical-response microphones for the most demanding recording applications, the CM Series can fit most any microphone need. Types include hand-held, headworn, hanging, or stand-mounted. With innovations such as Crown's patented Differoid® technology, the CM series combines years of technical know-how with durable, high-quality materials and workmanship. These qualities are direct contributors to the successful performances of our customers, and a primary reason for the success Crown enjoys today. Used by world-renowned artists such as Garth Brooks, Britney Spears and Janet Jackson, the Crown CM-311A Differoid microphone is the headworn microphone of choice for the live-performance industry. Featuring clear, crisp vocal performance in a lightweight package, this microphone signifies the quality and performance value of the Crown CM Series of microphones. Designed for touring and live-sound applications, the Crown® CM-311A is a rugged head-worn microphone with unequalled performance. It sounds like the best handheld microphones-full, clear, and distortion-free, even with the loudest singers. The CM-311A is the latest version of the Crown's proprietary Differoid® technology. Its cardioid pickup pattern rejects sounds from the rear, such as floor monitors. Its noise-canceling ability rejects sounds at a distance, such as instruments on stage and crowd noise. This results in the CM-311A having outstanding gain-before-feedback and isolation. Lightweight and comfortable, the mic's headband and boom adjust to fit any singer. An included pop filter greatly reduces breath noise and pops. Because of the boom's unique behind-the-ear design, it does not cover up the singer's face. Crown CM-311AE Features: Two models are available: CM-311A and CM-311AE. The CM-311A is powered by a 9V battery or phantom power. It has a battery belt pack with an on/off switch, a programmable mic on/off switch, and a Mic On LED. The CM-311AE is a pig-tail version allowing you to connect it to the wireless transmitter of your choice. NOTE: Putting an XLR connector on the CM-311AE and connecting to a mic input with phantom power WILL damage the mic element. For wired applications, use the CM-311A. How to adjust for best fit and to prevent boom bounce Note: To get the maximum performance out of this microphone, take the time to adjust it to fit correctly. For best results, the CM-311A MUST be custom fitted to a single user's head. This simple procedure takes only a few minutes. 1. If the microphone is for yourself, we suggest that you use a mirror to double check the fit as you make adjustments. 2. Loosen (just a little) the thumbscrew located on the outside of the foam block, part way back on the boom. This allows the boom to slid.
  SKU CROCM311AE
$207.27
Crown CM-31S60
Crown CM-31S60
Crown CM31S60 Crown CM31S60 Description: The Crown CM-31 is a professional-quality,supercardioid condenser microphone designed for inconspicuous miking of a choir, orchestra or stage. It also can hang over conference tables or discussion groups for inconspicuous isolated miking. The CM-31 consists of two parts: the micro-phone with a permanently attached 60' cable and the cylindrical electronics power module. The mic cable connects to the power module which adapts the microphone for phantom powering and includes a low-cut switch. Cable connection is via miniature 3-pin connectors. The power module output is balanced, low imped-ance. It is protected against static and radio-frequency interference. The CM-31 has a smooth, wide-range frequency response for natural reproduction of the singing voice, organ or other musical instruments. Extreme low frequencies are filtered out to reduce pickup of room rumble. The microphone has a built-in removable hanger which allows easy position adjustment. Crown CM31S60 Specifications: Type: Unidirectional condenser Transducer: Electret condenser Frequency Response (typical): 40 Hz to 20,000 Polar Pattern: Supercardioid Impedance: 150 ohms, balanced. Recommended minimum load impedance 1000 ohms. Open Circuit Sensitivity: 10 mV/Pa (-40 dB re 1 volt/Pa) Power Sensitivity: -37.5 dB re 1 mW/Pa Equivalent Noise Level: 28 dB SPL typical (0 dB = 0.0002 dyne/cm2), A-weighted S/N Ratio: 66 dB at 94 dB SPL Maximum Sound Pressure Level: 120 dB SPL produces 3% THD Mic-Cable Connector: TA3F (mini XLR-type) Power Module Connector (input): TB3M (mini XLR-type) Power Module Connector (output): 3-pin male XLR-type Operating Voltage: Phantom power, 12 to 48 volts DC, positive voltage on pins 2 and 3 with respect to pin 1 of output terminal Materials: Brass housing, steel power module faceplate Finish: Black Cable: Black, 60-ft 2-conductor shielded 0.1-in. (0.254-cm) diameter cable from microphone to electronics; none supplied for electronics output. Use 2-conductor shielded microphone cable. Dimensions (microphone only): .530 (1.3 cm) diameter, 1.446 (3.7 cm) length Included Accessories: WS-5 windscreen (black) Get your Crown CM-31S60 today!.
  SKU CROCM31S60
$257.5

"A reliable trustworthy company"
Mandy Lydia , Iowa, IA.

"Impressive selection of Instruments. Fast shipping".
Wayne G., Colorado, CO

"Frontierinstruments.com has the cheapest prices, and the best customer service - I'd recommend them to anyone"
Lisbeth Kamal ., MIAMI, CA

 
frontier instruments (frontierinstruments.com) is a registered trademark of Music Unlimited. All Rights Reserved. Publisher does not accept liability for incorrect spelling, printing errors (including prices), incorrect manufacturer specifications or changes, or grammatical inaccuracies in any product included in the website. Prices subject to change without notice.