Frontierinstruments.com
     
    Search on site:  
 
 
Brands
Products
Electro Voice  CB5-B
Electro Voice CB5-B
Electro Voice CB5-B Array rigging kit for two ZX5 loudspeakers, black This is a hardware suspension mounting kit consisting of 10 matching forged eyebolts for M8 metric insert points, and a pair of supplementary Anchor Plates, for securing a pair of the Electro-Voice Zx5 series of speakers to an overhead rigging system in a permanent-install P.A. application. Get your Electro Voice CB5-B product today.
  SKU ELECB5B
$116.25
Electro Voice  Eliminator ii
Electro Voice Eliminator ii
Electro Voice Eliminator® ii Electro Voice Eliminator® ii Description: The Electro-Voice Eliminator ii is a high-peak output, high-efficiency two-way stage system. The dual 15 in. low-frequency horn-loaded constant-directivity high-frequency system incorporates elements of Ring-Mode Decoupling (RMD™ ). RMD techniques substantially improve vocal fundamental intelligibility and produce an up front tonality capable of cutting through even the most difficultacoustic environments. The Eliminator ii™ enclosure has a unique design that presents a very minimal frontal cross section while still maintaining substantial internal volume. A newly developed handle concept allows for extremely comfortable transportation from any orientation. The design is lightweight, but very rugged and features a heavy metal grille and highly stylized corner protection. Electro Voice Eliminator® ii Features: Dual 15 inch Two-way High-output Stage System. 600 watt continuous RMD™ for Improved Clarity and Presence The heart of the Eliminator ii's high performance design is the combination of a high-excursion low-frequency suspension system with Electro-Voice's unique Ring-Mode Decoupling. All loudspeaker drivers exhibit mechanical resonance modes that add their own time-domain or ringing-mode colorations. These colorations limit and reduce overall system intelligibility. The Eliminator ii™ uses RMD to control several fundamental ringing modes. The result is substantially improved vocal range intelligibility and system openness. Two 15 inch drivers provide very high output at the lower frequencies. When extended high output low-frequency operation is required, performance can be further enhanced by biamping the Eliminator ii™ with the Eliminator i™ Sub. Vented enclosures offer excellent power handling and low distortion in the lowest octave of rate operation. However, it is always advisable to filter material below enclosure tuning to further improve system output and headroom. The Eliminator ii™ should be high-pass filtered to reduce subsonic material below 40 Hz. Get your Electro Voice Eliminator ii product today.
  SKU ELEELIII
$665
Electro Voice  EVID 12.1pw
Electro Voice EVID 12.1pw
Electro Voice EVID 12.1pw Electro Voice EVID 12.1pw Description: The Electro-Voice EVID 12.1P is a subwoofer system designed to complement the EVIDTM line of full-range loudspeakers. The 12.1P is ideal for supplementing the bass response of any EVIDTM model in an indoor application. It is particularly useful in sports bars, dance floors, retail environments, health clubs, restaraunts, etc. The 12.1P adds the extra dimension of a powerful low end where foreground music is desired. Its 650 watts of dynamic power and 126 dB maximum sensitivity1 is enough to satisfy any music requirement when used with EVIDTM Surface Mount Speakers.The 12.1P's slot-loaded design allows for flexible mounting and placement while delivering the smoothest bass response possible. Reinforced steel-fastener construction and the lowprofile bracket allow for a variety of wall, corner and ceiling mounting configurations.The 12.1P is available in black or white, and can easily be painted to match the decor. All mounting hardware is included. Get your Electro Voice EVID 12.1pw product today.
  SKU ELEEVID1PW
$639
Electro Voice  EVID 12.1w
Electro Voice EVID 12.1w
Electro Voice EVID 12.1w Electro Voice EVID 12.1w Description: The Electro-Voice EVID 12.1 is a subwoofer system designed to complement the EVIDTM line of full-range loudspeakers. The 12.1 is ideal for supplementing the bass response of any EVIDTM model in an indoor application. It is particularly useful in sports bars, dance floors, retail environments, health clubs, restaraunts, etc. The 12.1 adds the extra dimension of a powerful low end where foreground music is desired.The 12.1's slot-loaded design allows for flexible mounting and placement while delivering the smoothest bass response possible. The 12-inch high-excursion woofer, with its dual voicecoil design, enables both the L/R channels to feed into the speaker while at the same time providing crossed-over outputs for up to 4 satellite speakers. If desired, the 12.1 can be powered separately for an even more powerful presence. The 12.1 features reinforced steel-fastener construction that allows for a variety of mounting configurations.The 12.1 is available in black or white, and can easily be painted to match the decor. All mounting hardware is included. Get your Electro Voice EVID 12.1w product today.
  SKU ELEEVID12W
$380
Electro Voice  EVM12L Black Label 16
Electro Voice EVM12L Black Label 16
Electro Voice EVM12L Black Label 16 Electro Voice EVM12L Black Label 16 Description: Zakk Wylde signature guitar speaker, 12-inch, 300-watt, 16 ohms The original EVM12L 12 in. loudspeaker was introduced in 1983. Known for its huge tone, gorgeous low-end and incredible stability at extreme volumes, it quickly achieved legendary status. Top guitarists and bassists loved it not only for its sound, but also for its reliability. Tour after tour, the EVM-12L held up to the demands of the most punishing players. Enter: the EVM-12L Black Label, the official guitar loudspeaker of Zakk Wylde and Black Label Society. Take the EVM-12L, add Zakk's personal specs (improved power handling, improved magnet design, better venting, and th Black Label colors), and now you have the greatest guitar loudspeaker in the world. Wanna argue with Zakk on that? I didn't think so. Remember: The only label is Black. Handmade by hardworking, real American folks in Morrilton, Arkansas, the EVM-12L Black Label is the product of EV blood and sweat. Electro Voice EVM12L Black Label 16 Features: High output Bullet proof vented 16 lb magnet structure Massive low end Power Handling: 300 watts Get your Electro Voice EVM12L Black Label 16 product today.
  SKU ELEEVM12LB
$250
Electro Voice  PCS 501
Electro Voice PCS 501
Electro Voice PCS 501 Electro Voice PCS 501 Description: This is a 15' proprietary Power Cord with PowerCon to 120V Mains connectors, for multi-speaker installations involving the Electro-Voice Plasma Series of powered monitor speakers. Power Cord 15ft PowerCon-Mains 120V Get your Electro Voice PCS 501 product today.
  SKU ELEPCS501
$36
Electro Voice  WP-23
Electro Voice WP-23
Electro Voice WP-23 Electro Voice WP-23 Description: Aerobics sport pouch for beltpack transmitters Get your Electro Voice WP-23 product today.
  SKU ELEWP23
$55
Electro Voice 15704
Electro Voice 15704
Electro Voice 15704 Electro Voice 15704 Description: 4-watt 70.7-volt speaker transformer (4-, 2-, 1- and 0.5-watt taps), 0.5-dB insertion loss The Electro-Voice 15704 is a 4-watt speaker transformer for a 70.7- Volt line, offering 0.5-, 1-, 2- and 4-watt taps, with a low 0.5dB insertion loss. Get your Electro Voice 15704 product today.
  SKU ELE15704
$11.25
Electro Voice 15708
Electro Voice 15708
Electro Voice 15708 Electro Voice 15708 Description: 8-watt 70.7-volt speaker transformer (8-, 4-, 2- and 1-watt taps), 0.5-dB insertion loss The Electro-Voice 15708 is an 8-watt speaker transformer for a 25V or 70.7V line, offering 1-, 2-, 4-, and 8-watt taps, with a low 0.5dB insertion loss. Get your Electro Voice 15708 product today.
  SKU ELE15708
$16.5
Electro Voice 15716
Electro Voice 15716
Electro Voice 15716 Electro Voice 15716 Description: 16-watt 70.7-volt speaker transformer (16-, 8-, 4- and 2-watt taps), 0.5-dB insertion loss. The Electro-Voice 157016 is a 16-watt speaker transformer for 70.7V line, offering 2-, 4-, 8-, and 16-watt taps, with a low 0.5dB insertion loss. Get your Electro Voice 15716 product today.
  SKU ELE15716
$19.5
Electro Voice 15732
Electro Voice 15732
Electro Voice 15732 Electro Voice 15732 Description: 32-watt 70.7-volt transformer, 0.5-dB insertion loss The Electro-Voice 15732 is a 32-watt speaker transformer for 70.7V line, offering 4-, 8-, 16-, and 32-watt taps, with a low 0.5dB insertion loss. Get your Electro Voice 15732 product today.
  SKU ELE15732
$39
Electro Voice 1828C
Electro Voice 1828C
Electro Voice 1828C Electro Voice 1828C Description: Commercial Sound Compression Drivers A 30-watt heavy-duty convertible driver designed for use with compound diffraction horns. Designed for general public address applications. Weather-resistant for outdoor or indoor use, dual 1-inch screw-on exit, wide frequency response. Comes with threaded plug to convert to conventional driver. The Electro-Voice 1828C is a 30-watt convertible driver with a 1.5 voice-coil, designed for use with compound diffraction horns in public address applications. The weather-resistant exterior, finished in water-proof paint, is suitable for indoor and outdoor use, and is equipped with both a dual 1, screw-on exit, and a 1-3/8 x 7/8 threaded plug, allowing the 1828C to be mounted into any horn. Electro Voice 1828C Specifications: Frequency Response 260 Hz - 10 kHz, +/-5dB Maximum Power Handling 30 Watts Impedance 8 Ohms SPL 105dB Construction Weatherproof metal casing, phenolic diaphragms, rim-centered ferrite magnet Magnet Weight: 0.62 lb (0.28 kg) Material: Strontium Ferrite Voice Coil 1.5 (38mm) Dimensions (HxWxD) 3.3 x 4 (83 x 102mm) Weight 4.7 lb (2.2 kg) Get your Electro Voice 1828C product today.
  SKU ELE1828C
$67.5
Electro Voice 1828T
Electro Voice 1828T
Electro Voice 1828T Electro Voice 1828T Description: The Electro-Voice 1828T is a 30-watt convertible driver with a 1.5 voice-coil, and a 25V/70.7V matching line transformer, designed for use with compound diffraction horns in public address applications. The weather-resistant exterior, finished in water-proof paint, is suitable for indoor and outdoor use, and is equipped with both a dual 1, screw-on exit, and a 1-3/8 x 7/8 threaded plug, allowing the 1828T to be mounted into any horn. Power taps include 0.5W, 1W, 2W and 4W for 25V/70.7V lines, 8W, 15W and 30W for 70.7V lines Electro Voice 1828T Specifications: Frequency Response 260 Hz - 10 kHz, +/-5dB Maximum Power Handling 30 Watts Impedance 8 Ohms SPL 105dB Construction Weatherproof metal casing, phenolic diaphragms, rim-centered ferrite magnet Magnet Weight: 0.62 lb (0.28 kg) Material: Strontium Ferrite Voice Coil 1.5 (38mm) Dimensions (HxWxD) 5 x 4 x 5.3 (127 x 102 x 133mm) Weight 5.0 lb (2.3 kg) Get your Electro Voice 1828T product today.
  SKU ELE1828T
$105
Electro Voice 1829BT
Electro Voice 1829BT
Electro Voice 1829BT Electro Voice 1829BT Description: Commercial Sound Compression Drivers A 60-watt heavy-duty convertible driver designed for use with compound diffraction horns. Designed for general public address applications. Weather-resistant for outdoor or indoor use, dual 1-inch screw-on exits, wide frequency response. Comes with threaded plug to convert to conventional driver. The Electro-Voice 1829BT is a 30-watt convertible driver with a 1.5 voice-coil, and a 70.7V matching line transformer, designed for use with compound diffraction horns in public address applications. The weather-resistant exterior, finished in water-proof paint, is suitable for indoor and outdoor use, and is equipped with both a dual 1, screw-on exit, and a 1-3/8 x 7/8 threaded plug, allowing the 1829BT to be mounted into any horn. Power taps include 8W, 15W, 30W and 60W for 70.7V lines Electro Voice 1829BT Specifications: Frequency Response 260 Hz - 8 kHz, +/-5dB Maximum Power Handling 30 Watts Impedance 16 Ohms SPL 105dB Construction Weatherproof metal casing, phenolic diaphragms, rim-centered ferrite magnet Magnet Weight: 1 lb (0.45 kg) Material: Strontium Ferrite Voice Coil 1.5 (38mm) Dimensions (HxWxD) 5 x 6.4 (135 x 162mm) Weight 10.6 lb (4.8 kg) Get your Electro Voice 1829BT product today.
  SKU ELE1829BT
$176.25
Electro Voice 205-4T
Electro Voice 205-4T
Electro Voice 205-4T Electro Voice 205-4T Description: 10-watt 4-inch utility ceiling speaker with 4-watt 70.7-volt transformer (4-, 2-, 1- and 0.5-watt taps) A 4-inch, 10-watt continuous full-range speaker. An acoustically transparent dome encloses a small, centrally mounted free-edge cone that is used to improve high-frequency dispersion. Suitable for applications requiring highly intelligible speech or smooth musical reproduction. The Electro-Voice 205-4T is a 4-inch dual-cone, 10-watt, full-range installation ceiling loudspeaker with a 70.7V/100V matching line transformer. The acoustically transparent dome encloses a small, centrally mounted free-edge cone, for improved high-frequency speech or music dispersion. The speaker is suitable for applications requiring high-intelligibilty speech, or smooth musical reproduction in commercial installations Electro Voice 205-4T Features: 10-watt, 4 full-range ceiling component loudspeaker with 1.0 voice-coil and 70.7V/100V line transformer Transformer power taps include 0.5W, 1W, 2W and 4W for 70.V/100V lines Dust protection via integral dust dome Electro Voice 205-4T Specifications: Frequency Response 90 Hz - 18 kHz +/-5dB Maximum Power Handling 10 Watts Impedance 8 Ohms SPL 101dB SPL at 1m Construction 22-gauge stamped steel frame with black finish Magnet Weight: 0.72 lb (0.32 kg) Material: Barium Ferrite Voice Coil 1.0 (25.4mm) Dimensions (HxWxD) 8.1(Dia.) x 3.7(Depth) (206.5 x 94mm) Weight 2.8 lb (1.3 kg) Get your Electro Voice 205-4T product today.
  SKU ELE2054T
$19.5
Electro Voice 205-8A
Electro Voice 205-8A
Electro Voice 205-8A Electro Voice 205-8A Description: 10-watt 4-inch utility ceiling speaker, 8 ohms A 4-inch, 10-watt continuous full-range speaker. An acoustically transparent dome encloses a small, centrally mounted free-edge cone that is used to improve high-frequency dispersion. Suitable for applications requiring highly intelligible speech or smooth musical reproduction. The Electro-Voice 205-8A is a 4-inch dual-cone, 10-watt, full-range installation ceiling loudspeaker. The acoustically transparent dome encloses a small, centrally mounted free-edge cone, for improved high-frequency speech or music dispersion. The speaker is suitable for applications requiring high-intelligibility speech, or smooth musical reproduction in commercial installations. Electro Voice 205-8A Features: 10-watt, 4 full-range ceiling component loudspeaker with 1.0 voice-coil Dust protection via integral dust dome Electro Voice 205-8A Specifications: Frequency Response 90 Hz - 18 kHz +/-5dB Maximum Power Handling 10 Watts Impedance 8 Ohms SPL 101dB SPL at 1m Construction 22-gauge stamped steel frame with black finish Magnet Weight: 0.72 lb (0.32 kg) Material: Barium Ferrite Voice Coil 1.0 (25.4mm) Dimensions (HxWxD) 8.1(Dia.) x 2.2(Depth) (206.5 x 56mm) Weight 2.0 lb (0.9 kg) Get your Electro Voice 205-8A product today.
  SKU ELE2058A
$15
Electro Voice 205-8T
Electro Voice 205-8T
Electro Voice 205-8T Electro Voice 205-8T Description: 10-watt 4-inch utility ceiling speaker with 8-watt 70.7-volt transformer (8-, 4-, 2- and 1-watt taps) The Electro-Voice 205-8T is a 4-inch dual-cone, 10-watt, full-range installation ceiling loudspeaker with a 70.7V/100V matching line transformer. The acoustically transparent dome encloses a small, centrally mounted free-edge cone, for improved high-frequency speech or music dispersion. The speaker is suitable for applications requiring high-intelligibilty speech, or smooth musical reproduction in commercial installations. Electro Voice 205-8T Features: 10-watt, 4 full-range ceiling component loudspeaker with 1.0 voice-coil and 70.7V/100V line transformer Transformer power taps include 1W, 2W, 4W and 8W for 70.V/100V lines Dust protection via integral dust dome Electro Voice 205-8T Specifications: Frequency Response 90 Hz - 18 kHz +/-5dB Maximum Power Handling 10 Watts Impedance 8 Ohms SPL 101dB SPL at 1m Construction 22-gauge stamped steel frame with black finish Magnet Weight: 0.72 lb (0.32 kg) Material: Barium Ferrite Voice Coil 1.0 (25.4mm) Dimensions (HxWxD) 8.1(Dia.) x 3.7(Depth) (206.5 x 94mm) Weight 2.8 lb (1.3 kg) Get your Electro Voice 205-8T product today.
  SKU ELE2058T
$22.5
Electro Voice 209-4T
Electro Voice 209-4T
Electro Voice 209-4T Electro Voice 209-4T Description: The Electro-Voice 209-4T is an 8-inch dual-cone, 10-watt, full-range installation ceiling loudspeaker, with a 70.7V/100V matching line transformer. The acoustically transparent dome encloses a small, centrally mounted free-edge cone, for improved high-frequency speech or music dispersion in commercial installations. 10-watt 8-inch utility ceiling speaker with 4-watt 25/70.7/100-volt transformer (4-, 2-, 1-, and 0.5-watt taps) Electro Voice 209-4T Features: 10-watt full-range ceiling component loudspeaker with 1.0 voice-coil and 70.V/100V matching line transformer Transformer power taps include 0.5W, 1W , 2W, and 4W for 70.7V/100V lines Electro Voice 209-4T Specifications: Frequency Response 80 Hz - 15 kHz Maximum Power Handling 10 Watts Impedance 8 Ohms SPL 104dB SPL at 1m Magnet Weight: 0.72 lb (0.32 kg) Material: Barium Ferrite Voice Coil 1.0 (25.4mm) Dimensions (HxWxD) 8.1(Dia.) x 2.75(Depth) (206.5 x 70mm) Weight 3.0 lb (1.4 kg) Get your Electro Voice 209-4T product today.
  SKU ELE2094T
$15.75
Electro Voice 209-4TWB
Electro Voice 209-4TWB
Electro Voice 209-4TWB Electro Voice 209-4TWB Description: The Electro-Voice 209-4TWB is an 8-inch dual-cone, 10-watt, full-range installation ceiling loudspeaker, with a 70.7V/100V matching line transformer. The acoustically transparent dome encloses a small, centrally mounted free-edge cone, for improved high-frequency speech or music dispersion in commercial installations. Electro Voice 209-4TWB Features: 10-watt full-range ceiling component loudspeaker with 1.0 voice-coil and 70.V/100V matching line transformer Transformer power taps include 0.5W, 1W , 2W, and 4W for 70.7V/100V lines Electro Voice 209-4TWB Specification: Frequency Response 80 Hz - 15 kHz Maximum Power Handling 10 Watts Impedance 8 Ohms SPL 104dB SPL at 1m Magnet Weight: 0.72 lb (0.32 kg) Material: Barium Ferrite Voice Coil 1.0 (25.4mm) Dimensions (HxWxD) 13.0(Dia.) x 3.0(Depth) (330 x 76mm) Weight 3.6 lb (1.6 kg) Get your Electro Voice 209-4TWB product today.
  SKU ELE2094TWB
$24.75
Electro Voice 209-8A
Electro Voice 209-8A
Electro Voice 209-8A Electro Voice 209-8A Description: 10-watt 8-inch utility ceiling speaker, 8 ohms The Electro-Voice 209-8A is an 8-inch dual-cone, 10-watt, full-range installation ceiling loudspeaker. The acoustically transparent dome encloses a small, centrally mounted free-edge cone, for improved high-frequency speech or music dispersion in commercial installations. Electro Voice 209-8A Features: 10-watt, 8 full-range ceiling component loudspeaker with 1.0 voice-coil and 2.2 free-edge cone Dust protection via integral dust dome Electro Voice 209-8A Specifications: Frequency Response 80 Hz - 15 kHz Maximum Power Handling 10 Watts Impedance 8 Ohms SPL 104dB SPL at 1m Magnet Weight: 0.72 lb (0.32 kg) Material: Barium Ferrite Voice Coil 1.0 (25.4mm) Dimensions (HxWxD) 8.1(Dia.) x 2.75(Depth) (206.5 x 70mm) Weight 2.2 lb (1.0 kg) Get your Electro Voice 209-8A product today.
  SKU ELE2098A
$11.25

"A reliable trustworthy company"
Mandy Lydia , Iowa, IA.

"Impressive selection of Instruments. Fast shipping".
Wayne G., Colorado, CO

"Frontierinstruments.com has the cheapest prices, and the best customer service - I'd recommend them to anyone"
Lisbeth Kamal ., MIAMI, CA

 
frontier instruments (frontierinstruments.com) is a registered trademark of Music Unlimited. All Rights Reserved. Publisher does not accept liability for incorrect spelling, printing errors (including prices), incorrect manufacturer specifications or changes, or grammatical inaccuracies in any product included in the website. Prices subject to change without notice.